Steffes Comfort Plus Hydronic 5120 Скачать руководство пользователя | Manualshive

Страница: 38 / 38

background image

Registering your purchase is an essential step to ensure warranty coverage. A Warranty Registration card is
included with the Owner's Manual. Simply complete, detach the bottom portion, and return the card today.
Retain the top portion of the card for your files.

WARRANTY STATEMENT

Steffes Corporation (

“

Steffes

”

) warrants that the Steffes Electric Thermal Storage Heating Appliance is free from

defects in materials and workmanship under normal use and service. Steffes

’

obligation under this Warranty is limited

to the repair or replacement of the appliance or parts only which prove to be defective under normal use within five
(5) years of the date of installation and which Steffes

’

examination of the returned appliance or part(s) shall verify to

Steffes

’

satisfaction that it is defective. Optional Steffes controls and accessories have a one (1) year warranty

coverage period. The user shall be responsible for any labor costs associated with the repair or replacement of the
appliance or part(s), including the cost of returning the defective appliance or part(s) to Steffes Corporation.

This Warranty is void if the heating appliance is moved from the premises in which it was originally installed. This
Warranty shall not apply to an appliance or part which has been altered in any respect, or improperly installed, serviced
or used, or has been subject to accident, negligence, abuse or misuse.

THE ABOVE WARRANTY BY STEFFES IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN-
TIES, WHETHER WRITTEN OR ORAL, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.

The user assumes all risk and liability whatsoever resulting from the use of this heating appliance. In no event shall
Steffes be liable for any indirect, special or consequential damages or lost profits.

This Limited Warranty contains the complete and exclusive statement of Steffes

’

obligations with respect to the heating

appliance and any parts thereof. The provisions hereof may not be modified in any respect except in writing and signed
by a duly authorized officer of Steffes.

Warranty

Thank you for purchasing Steffes ETS heating equipment. We welcome your comments

relating to the Comfort Plus and this manual. Enjoy your new purchase!

3050 Hwy 22 North

•

Dickinson, ND 58601-9413

•

www.steffes.com

DOCUMENT #1200059

«
...
36
37
38

Содержание Comfort Plus Hydronic 5120







































Отзывы:

Нет отзывов

Похожие инструкции для Comfort Plus Hydronic 5120

Бренд: Water Worker Страницы: 24

Бренд: Zodiac Страницы: 12

Бренд: Orava Страницы: 19

Бренд: Ambia Страницы: 7

Бренд: Clarke Страницы: 23

Бренд: Oilon Страницы: 68

Softheat EBHN500

Бренд: Cadet Страницы: 10

Бренд: Nikrans Страницы: 19

Бренд: Fakir Страницы: 44

Бренд: Pace Страницы: 84

Бренд: American Water Heater Страницы: 24

Бренд: Aqua Comfort Страницы: 32

Бренд: Hornbach Страницы: 129

Optyma OP-SMLZ Series

Бренд: Danfoss Страницы: 4

Бренд: Harbor Freight Tools Страницы: 12

Бренд: Fairland Страницы: 29

Бренд: RF Window Страницы: 42

Бренд: Envirovent Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды