SteelMax S14, Руководство оператора

Страница: 11 / 18

11
ASSEMBLY
Your SteelMax® brand saw is shipped complete and protected inside its shipping box.. Remove all contents
from the box and inspect to ensure no damage was incurred during shipping. Your S14 Metal Cutter package
should also include the following:
D E S C R I P T I O N P A R T
#
Q T Y
OPERATOR’S MANUAL 1
EARPLUGS (2) STEELMAX80289 1
SAFETY GOGGLES STEELMAX80290 1
8MM WRENCH SMS14-76 1
14” STEEL BLADE (OPTIONAL) STEELMAXBL014 1
GETTING STARTED
CAUTION!
ALWAYS DISCONNECT THE SAW FROM POWER SOURCE BEFORE MAKING ADJUSTMENTS
.
Refer to the "Functional Description" on page 8 and "Exploded View” drawing on page 10. If required, install
an authorized metal cutting saw blade by first loosening wingnut (item 134) and rotating the swivel guard
(item 130) up and out of the way. Then loosen the 8mm blade hex bolt and remove the outer blade flange
and washer. Verify the correct seat of blade onto the inner blade flange lip. Always check blade installation
for proper direction of rotation. From the front of saw, blade travels downward. Improper mounting will
cause blade wobble and a possible hazardous condition. Reinstall blade bolt and flanges. Position Swivel
guard and secure with thumb screw (item# 134).
ADJUSTING THE VISE
The vise has two positions for optimal cutting and a
quick release swivel vise (item 88) for use with pipe,
tub- ing and round profiles. Always use the vise in the
most forward position that will completely cut through
the material. Smaller profiles can lift out of the vise
more easily when the vise is in the rear most position.
Larger material requires the vise be moved to the rear
position. To move the vise, proceed as follows:
Loosen the right side hex bolt and remove (item 95)
using the supplied 8mm hex wrench. Loosen and
remove the left side miter lock bolt (item 91). Move the
vise to the desired position and reinstall.
The thread vise wheel handle and movable vise jaw
should be positioned to tightly grip material to be cut.
Vise Plate
Quick release
pipe vise
Vise Jaw