SteelMax S14, Руководство оператора

Страница: 5 / 18

SPECIFIC SAFETY RULES AND SYMBOLS
5
KEEP HANDS AND
BODY AWAY FROM
AND TO THE
SIDE OF BLADE.
CONTACT WITH
BLADE WILL RESULT
IN SERIOUS INJURY!
Use only authorized
replacement blades!
WARNING:
To reduce the risk
of injury, check lower
guard. It must close
instantly!
Support and clamp
work. Wear eye and
hearing protection.
WARNING:
Drop piece may pose
an ejection hazard!
Use extra caution
when cutting thin
slices.
ALWAYS WEAR
EYE AND
HEARING
PROTECTION
WARNING:
M
od
el
s
1
4
WARNING!
DO NOT OPERATE MACHINE IF WARNING AND
/
OR INSTRUCTION LABELS ARE MISSING OR DAMAGED
.
CONTACT STEELMAX FOR REPLACEMENT LABELS
.
14 Inch Metal Cutter
E249773
J1GM-DV-355
Model s14
www.steelmax.c om
19YZ
n
o
1450/min
Amps 15 A
Blade Arbor
1" Volts
0
120 V ~
(50-60 Hz)
Maximum Depth of cut (90 ) 4.75”
0 0
WARNING:
Maximum Solid Mild Steel Cutting Capacity 1"
Made in Chi na
Date of
RETURN THIS GUARD TO ITS ORIGINAL
POSITION AND SECURE IT IN PLACE
AFTER CHANGING BLADE
Serial #
Manufact ure
To r e d uc e the r i s k o f i nj u r y, u s e r mu st
r ea d a n d un de r st an d in stru ction m anual .
USE ONLY STEELMAX AUTHORIZED REPLACEMENT
SAW BLADES!
MILD STEEL
STEELMAXBL014
THIN MILD STEEL
STEELMAXBL014TS
ALUMINUM
STEELMAXBL014AL
STAINLESS STEEL
STEELMAXBL014SS
WAR N I N G:
KEEP HANDS OUT OF THE PATH OF SAW BLADE!
ALWAYS WEAR EYE AND HEARING PROTECTION
DURING OPERATION!
EYE PROTECTION
REQUIRED
HEARING PROTECTION
REQUIRED
NEVER PLACE
FINGERS NEAR
CUTTING AREA
LINE VOLTAGE
PRESENT
Symbol Description
14 Inch Industrial Metal Cutting Saw
WAR N I N G:
FOR YOUR OWN SAFETY READ I NS TRUCTION MANUAL
BEFORE OPERATING SAW
1. AL WAYS WEAR EYE PROTECTION
2. KEEP HANDS OUT OF PATH OF SAW BLADE.
V ................................................ volts
A ................................................ amperes
Hz .............................................. hertz
min ............................................. minutes
~................................................. alternating current
no .............................................. no load speed
3. DO NOT OPERATE SAW WITHOUT GUARD IN PLACE.
4. DO NOT PERFORM ANY OPERATION FREEHAND.
5. NEVER REACH AROUND SA W BLADE.
6. TURN OFF TOOL AND WAIT FOR SAW BLADE TO STOP
BEFORE MOVING W ORKPIECE OR CHANGING SETTINGS.
7. DISCONNECT POWER BY UNPLUGING TOOL BEFORE
CHANGI NG BLADE OR SERVICING.
8. DO NOT WEAR NECKTIES, JEWLERY OR LOOSE CLOTHING.
9. USE ONLY 14” CARBIDE TIPPED METAL CUTTING SAW
BL ADE RATED AT A MINIMUM OF 1500 RPM.
1. Only use SteelMax brand approved saw blades. Unauthorized blades may be dangerous!
2. Keep saw blades securely fastened. Check blade flanges for debris before installing any new blade.
3. Do not use dull or broken blades. Check blades often for condition and wear.
4. Check blade cover for proper fit to minimize the risk of flying debris.
5. Beware of ejecting chips. They become HOT both during and after cutting.
6. Always make provisions for safe handling of excess material.
7. Keep saw base free from dirt and other debris.
8. Beware of ejecting drop piece. Thinner slices pose a significant ejection hazard.
To obtain an additional copy of your manual please contact Steelmax at:
Ph. 1-87steelmax
Fx. 303.690.9172
www.steelmax.com