SteelMax D1 AUTO, Руководство оператора, Страница: 8 / 23

D1
D1 Operator’s Manual
8
3. STARTUP AND OPERATION
3.1. Installing, removing, and operating the annular cutter
Unplug the machine from the power source, and then rotate the handles to the right
( 1 , Fig. 1) to raise the motor. Wear protective gloves, insert the proper pilot pin into
the annular cutter ( 2 ), and then use a clean and dry cloth to wipe the arbor and
cutter. Next, insert the cutter into the arbor ( 3 ) so that the flats 4 are aligned with the
set screws 5 , and then use the 4 mm hex wrench to tighten both set screws.
To remove the cutter, loosen the screws 5 with the 4 mm hex wrench.
Fig. 1. Installing the annular cutter
2
1
3
5
4