SteelMax ARC Runner, Руководство оператора

Страница: 19 / 56

ARC Runner
ARC Runner Operator’s Manual
19
3.8.2. Welding with oscillation
If the oscillator is connected to the ARC Runner welding carriage, several new
settings will appear in the menu (Tab. 2). Welding with oscillation is performed in the
standard manner; however, produced welds form a shape similar to the shape shown
in Fig. 7 instead of the straight line from Fig. 6.
Parameter Value Description
0
–100%
[step: 10% or 1%]
Relative amplitude of the oscillation.
0
–100%
[step: 10% or 1%]
Relative speed of the oscillation. The
higher the speed, the shorter the
oscillation period.
0
–5 s
[step: 1 or 0.1]
Dwell time in the top position of the
oscillation.
0
–5 s
[step: 1 or 0.1]
Dwell time in the bottom position of
the oscillation.
YES
NO Choosing YES locks the capability of
changing dwell times during welding.
Tab. 2. Additional settings available with connected oscillator
Fig. 7. Graphic description of the oscillation parameters from Tab. 2
Starting point of the weld
Final point of the weld
1 /