Steelmate PTS600MM, Руководство пользователя

Страница: 5 / 16

Learning function
Be Be
Be
6
Learning function for cars with front metal bar
Turn the ignition on, press the footbrake and connect the green learning wire (located in the main front ECU
wiring loom) to a +12V power supply. The system will perform learning procedure.
The LED light will flash once, then turn on and give 2 audible tones. This indicates that the learning function
is successful and the system will ignore the front protrusion. Once programmed, disconnect the green wire
and insulate it.
Learning function for cars with rear tow-bar or spare wheel
Turn the ignition on, then within 10 seconds, shift the vehicle in and out of reverse gear 5 times staying in
reverse position on the 5th time.
The display will flash and give an audible tone, this indicates that the learning function is successful and
the system will not warn for tow-bar or spare wheel.
M5 display M6 display M8 display
M5 display M6 display M8 display
Be Be Be Be
Note: if the vehicle does not have front metal bar or other front protrusion, the above procedure is not needed.
Be Be
Note: If the vehicle does not have rear tow-bar/spare wheel, the above procedure is not needed.
How does the system work
Driving forward
7
Be ****
Distance: <0.3m/0.9ft
Be ** Be **
Distance: 0.6m/2.2ft
No beep
Distance: 1m/3.3ft
The front system will keep working for 5 seconds after the footbrake is released.