Steelmate 888W1, Руководство пользователя

Страница: 11 / 16

18 19
Continued
The shaded options are factory setting
Note:
F1 Turbo timer
Turbo timer function will be activated after ignition
is on for more than 1 minute (F19/2 or F21/2 need
to be programmed). It will keep a turbo vehicle
engine running for 1, 3, 10, and 15 or 30 minutes
according to F1 after you remove the key.
F2 Limitation of false alarm
If the same input triggers the system 6 times during
a single arming cycle, the system will bypass that
input, keeping the other zones protected until the
next time the system is armed.
F3 Ignition locking
F3/1: the doors will not be locked automatically
when ignition is on;
F3/2: the doors will be locked automatically when
ignition is on;
F3/3: the doors will be locked when the car's speed
reach the pre-set speed (with F15/2)
Pager (-)
5 chirps 1 chirp 2 chirps 3 chirps 4 chirps Function
F23
F24
Passive
arming
Door lock if
passive
arming on
When disarmed,
signal "-" 20 sec
Off
Off
Off
On
On
10 sec
Turbo timer
(-)
Description
CH6 output:
two blue/black
wires
Window/
sunroof closer
F20
F21
F22
CH5 output
Off
Door (+) Door (-)
15 sec
W-trigger (start
and stop by
real time) W-trigger (start
for 1 sec by
real time)
22 sec 30 sec
W-trigger (start
for 1/0.5/1 sec
by real time)
F25
STOP (-/+)
function of
door trigger
F3/4: the doors will be locked when footbrake is
pressed (by F25) automatically.
The system will not lock the doors if any door is
opened when the ignition is turned on.
F4 Ignition unlocking
F4/1: the doors will not be unlocked when ignition
is off;
F4/2: the doors will be unlocked automatically when
ignition is off;
F5 Auto rearm
Automatically rearms the system in case of
accidental disarming. Select among auto rearm off,
auto rearm without door locking and auto rearm
with door locking.
F6 Arming delay
This optional arming delay mode allows system to
delay arming for 5, 35 or 60 seconds. This mode
is designed for vehicle with dome light delay.
F7 Door lock/ unlock pulse
Select between a 0.5 second lock/0.5 second unlock,
1 second lock/1 second unlock for standard vehicles,
3.5 seconds lock/3.5 seconds unlock for vacuum
lock system, 1 second lock/1 second unlock 2 times
for some Japanese vehicles.
F8 CH2 output
Press transmitter button CH2 to activate this feature:
F8/1: the blue wire will output signal (-) for 1 second
to turn on device, such as releasing trunk.
F8/2: the blue wire will output signal (-) for 30
seconds to roll up windows.
F8/3: the blue wire will output signal (-), press CH2
button again to stop output signal (-).
F8/4: the blue wire will always output signal (-) after
ignition on.
F9 CH3 output
Press transmitter button CH3 to activate this feature:
F9/1: the green/red wire will output signal (-) 1
second to turn on device, such as releasing trunk.
F9/2: the green/red wire will output signal (-) for 3.5
seconds.
F9/3: the green/red wire will output signal (-) for 12
seconds
F9/4: the green/red wire will output signal (-) for 0.4
seconds, pause 0.3 seconds and then output signal
(-) for 0.4 seconds again.
F9/5: the green/red wire will output signal (-) for 1
second, pause 0.5 seconds and then output signal
(-) for 1 second again.
F10 CH4 output:
F10/1~4: When the system is armed, the
Green/White wire can output signal (-) for different
time to activate other devices: 1 second, 10 seconds,
15 seconds or 30 seconds.
F10/5: when the system is disarmed, the
Green/White wire will output signal (-) for 20 seconds.