Steelmate 888W1, Руководство пользователя

Страница: 9 / 16

Car alarm system
Installation Manual
14 15
System will enter the F1 programming mode (LED
will flash once after one pause).
In programming mode, the number of times LED
flashes is corresponding to the function number.
To change function setting, press transmitter button
(1~5 times). According to the different function
settings, the siren will send out 1/2/3/4/5 chirps.
Press valet switch to go to next function.
If you do not press any button in 10 seconds,
system will exit programming mode.
F12 - Personal code: function programming
Enter the personal code [24.1].
Siren chirp will confirm if personal code is correct.
Press valet switch 3 times in 3 seconds. Siren will
chirp once.
Turn ignition off in 3 seconds. Siren will chirp once.
Turn ignition on in 3 seconds. Siren will chirp once.
System will enter the F1 programming mode (LED
will flash once after a pause).
In the programming mode, the number of the LED
flashes is corresponding to the function number in
system programming table.
To change function setting, press transmitter button
. According to the different function settings, the
siren will send out 1/2/3/4/5 chirps.
Press valet switch to program next function.
If you do not press any button in 10 seconds,
system will exit programming mode.
F12 - personal code
Switch off the power of the transponder card (if
available)
Follow the steps of "How to enter the personal
code" [24.1], the siren will chirp once to confirm if
personal code is correct.
Press valet switch 3 times, the siren will chirp once.
Only 2 transmitters can be programmed for the
system.
Switch on the power of transponder card. The siren
will chirp once to confirm transponder card is
programmed (If available).
Turn ignition off to exit or 10 seconds later to exit
automatically.
26. System programming
F1-F10 can be programmed and it is independent
of F12.
F12 - valet
F1-F25 can be programmed.
F12 - personal code
F1-F10 can be programmed without personal code.
F11-F25 can be programmed only after entering
personal code. System will exit programming mode
if there is no button pressed in 10 seconds.
F12-valet: function programming
Disarm system, turn ignition on, press valet switch
3 times in 3 seconds. Siren will chirp once.
Turn ignition off in 3 seconds. Siren will chirp once.
Turn ignition on in 3 seconds. Siren will chirp once.