Page 6 of 6
939510100 Rev B
®
8.
Using two (2) people, flip the easel upright onto the casters.
9.
Inspect unit for squareness. If unit is square, go to step 10.
If the top track is twisted, loosen (do not remove) all sixteen (16)
hex head leg screws with the unit in the upright position (on
casters). Adjust unit as needed. Re-tighten hex head screws.
10.
Tighten the machine screws that were installed in step 6,
making sure the tray is adjusted to its lowest point.
8
10
9
