manualshive.com logo in svg

Steelcase V.I.A. FEIJA2V, Руководство пользователя

Поделиться
Скачать
Steelcase V.I.A. FEIJA2V Скачать руководство пользователя страница 1

Page 1 of 38

939502326 Rev G

If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, 
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com

©

 

2017 Steelcase Inc. 

Grand Rapids, MI 49501 
U.S.A.  
Printed in U.S.A.

CAUTION

FAILURE TO PROPERLY SECURE
V.I.A. TO THE BUILDING COULD
RESULT IN PERSONAL INJURY.

CRUSH HAZARD!

Read the entire Assembly Directions
before beginning installation.
Building construction varies greatly. The
Building’s Engineer of Record is responsible
for the design of building floors, ceilings
and walls which V.I.A. attaches to and must
verify the adequancy of the mounting
even if provided by Steelcase.
The building owner or designated agent is
responsible for verifying that the
installation is in compliance with all local
codes and regulations.

Non-Seismic Applications*
*

 The building’s Engineer of Record must be

consulted to determine if there are any
seismic requirements.

V.I.A.

™

 - Frames & Structure

Installation Reference Identification (IRID) Label example shown above. 
Many V.I.A. Products have specific locations within the floor plan layout. 
These products will be identified with an Installation Reference Identification Label. 
The Installation Reference ID Label number will indicate the location of the product 
within the floor plan layout. Detailed information can be found on the label 
including style/model number, finish, Plan dimensions, Measured dimensions etc....

By Steelcase Inc.  Grand Rapids, MI 49501-1967

www.steelcase.com/patents

Model:  FEIJA2V

Ship Date:  10/09/13 Athens

Order No.:  05207605-001160

Barcode:  1PN8Z952O

Assembled By:  F529602

Finishes  

6249

J0DEF

PH: 108.000 MH: 105.618

Содержание V.I.A. FEIJA2V







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды