1
1.
Insert LH/RH end brackets hooks into panel
upright slots.
(See page 2 for bracket identification).
2.
Verify full engagement of safety catches by
lifting up on the installed brackets.
end brackets.
3b.
Make sure the support brackets engage
the back stop.
4.
Attach shelf to end brackets with two
#8 x 3/8" screws at front corners.
5.
Stabilize adjoining shelves with #8 x 3/8"
screws and tie strap under front edge.
6.
To remove shelf, release both end bracket
safety catches and lift shelf upward and away
from the panel.
3a
SUPPORT BRACKET
2
TIE STRAP
4
5
NOTE:
Larger shelves may
require two people.
TIP:
Disassembly of a Series 9000
shelf may aid reconfiguration
installation.
Universal Shelf
Use on:
• Technology Wall
• Answer
• kick
• Series 9000
• ap40
END BRACKET (LH)
END BRACKET (RH)
Page 3 of 4
939501638 Rev C
3a.
Position shelf between and on top of
(SERIES 9000)
NOTE:
Tap into position with mallet for Series 9000.
ENGAGED
POSITION
RELEASED
POSITION
SAFETY
CATCH
#8 x 3/8" SCREW
6
#8 x 3/8" SCREW
*
*
*
*
BACK STOP
SUPPORT
BRACKET
HOLE SET FOR TWO 48" PANELS
HOLE SET FOR 48" AND 60" PANEL
HOLE SET FOR TWO 60" PANELS
(AVENIR)
3b
• Montage
• Avenir
