Page 3 of 5
939500310 Rev A
1
2
3
4
5
TAB
45º or 2:00
CL
PLASTIC PLUG
COVER
COIN OR
HEAD OF KEY
PLASTIC PLUG
TURN 90o
3:00
45º
PLUG RETAINER TAB
Removal of Plastic Lock Plug and
Installation of Lock Cylinder
1.
Pull open plastic plug cover.
2.
While pressing the plug retainer tab to the right,
insert a coin or the head of a key into the slot and
turn 90º clockwise. This will unlock the case. You will
hear the lock mechanism open.
3.
Push plug retainer tab down and remove plastic
plug from parent unit.
4.
Position lock cylinder tab at 45º or 2:00 position.
Insert lock cylinder at a tilted angle so the tab will
collapse.
5.
Push lock cylinder into the hole until it stops and
turn the lock plug assembly clockwise 45º (or the
3:00 position) and remove the key.
CAUTION: Make sure you unlock the
case
BEFORE proceeding to step 3.
CAUTION: Make sure the tab is
located at 45º or 2:00 before
inserting lock cylinder.
CAUTION: Failure to
follow the installation
instructions will cause
inability to install lock.
PLUG RETAINER TAB
