Page 4 of 5
939500310 Rev A
27"
1/16" R
2 PLACES
1-1/2"
3"
4-3/8"
5"
3/16" DIA
CENTER LINE
OF DESK
TEMPLATE
DESKTOP
TEMPLATE
Screen and Post Assembly
Tops are shipped without screen
mounting holes. To attach screens, holes
must be drilled on site using the supplied
template. Plugs are available through
Customer Service Parts (TS5YGMTSR)
when screens are not in use and have
been removed from the top.
Screens can be mounted above the
worksurface as privacy screens, below
the worksurface as modesty screens, or
above and below to serve both purposes.
Below are several versions of screen
mounting configurations.
1.
Make sure that the drilled holes are perpendicular
to the top surface to ensure that the posts assemble
correctly.
2.
Cut out template.
3.
Measure and mark centerline of desk with pencil.
4.
Trace the hole onto the top using a ball point pen.
After you have traced all the holes needed for the
screens, drill through the worksurface from the top side
down using a sharp 5/16" diameter drill bit.
