Steelcase Migration SE Pro, Руководство пользователя

Страница: 4 / 10

Reset Instructions
RESETTING THE BASE
Note:
Make sure there is nothing under the base before setting to its
lowest position. If the cable is obstructed it will not reset
properly.
1. Press and hold the Down arrow; the desk will begin to go down.
2. Once the desk reaches its lowest height, continue to press the Down arrow
for 5 seconds, until the digital display shows “RST”.
3. Release and then press the Down arrow again; the recalibration process will
now begin.
4. When reset is complete, the digital display will show
650mm (3-stage)
or
720mm (2-stage)
.
Standard Handset - Up/Down Controls
A. Up Button
B. Down Button
Upgraded Handset - 4 Memory Preset
A. Height Adjustment Buttons
B. Memory Position Buttons
C. Memory Setting Buttons
D. Digital Display
Height Ranges
2-Stage : 720mm - 1180mm
3-Stage : 650mm - 1250mm
CONTROLLER LAYOUT