Page 3 of 23
939500246 Rev F
5.
Lower panels (a and b) onto the
connecting bolts located in worksurface (c).
6.
Insert (3) cam locks into the holes on
the panel (a) (6a), making sure the arrow
on the cam lock is pointed toward the
connecting bolt (6b). Turn cam lock with
screwdriver 1/4 turn to secure connecting
bolt (6c).
7.
Insert (3) cam locks into the holes on
the panel (b) (7a), making sure the arrow
on the cam lock is pointed toward the
connecting bolt (7b). Turn cam lock with
screwdriver 1/4 turn to secure connecting
bolt (7c).
8.
Using two (2) people, flip unit over and
adjust glides.
ARROW POINTING IN
DIRECTION OF THE
CONNECTING BOLT HEAD
6b
CAM LOCK
6a
5
BOTTOM / REAR OF WORKSURFACE
b
c
a
b
a
ARROW POINTING IN
DIRECTION OF THE
CONNECTING BOLT HEAD
7b
CAM LOCK
7a
b
a
6c
7c
