Page 12 of 23
939500246 Rev F
Center Support Panel
1.
Carefully turn worksurface over
onto clean, soft surface.
2.
Install L-bracket to one side of
the center support panel (a) using
(5) screws (2a).
Install a second L-bracket to the
other side of the center support
panel (a) using (5) screws (2b).
3.
Position center support panel (a)
onto the worksurface (c). Make sure
center support bracket (a) is
positioned no more than 60" from
either end panel (b) or worksurface
may weaken.
4.
Fasten each L-bracket to
worksurface (c) using (5) screws
per L-bracket.
2a
3
2b
a
a
c
b
b
L-BRACKET
L-BRACKET
NO MORE
THAN 60"
FROM END
PANEL (B)
NO MORE
THAN 60"
FROM END
PANEL (B)
4
