Elective Elements, Walden - Fixed Modesty Panel used on
a Freestanding Desk, Meeting or Extended Bullet Worksurface
2
3
3/16" Drill Bit
Floating 2/3-height modesty panel
attached to a Desk Table.
See page 10.
5/32" Drill Bit
4
Full-height modesty panel
sits proud of the storage unit
back or support back.
See page 4.
2/3-height modesty panel
sits proud of the underworksurface
storage back panels.
See page 6.
Inset modesty panel
between two underworksurface
storage cabinets.
See page 2.
2/3-height modesty panel
attached to an adjustable-height leg.
See page 8.
Floating 2/3-height modesty panel
attached to a Meeting or Extended
Bullet Worksurface. See page 10.
NOTICE
3
Steps for correct installation of
soft close drawers
1
2
1
2
3
Pull LH and RH suspensions to full extents
Find and disengage rear posts, LH and RH
Align drawer suspensions and install
1134607001
Soft close mechanism
can be damaged if this
step is skipped.
RH post is
shown here
in yellow
Page 1 of 10
P/N 939500227
Doc # 108322 Rev J
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE
(888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2018 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
