3
3
CHANNEL
4
LOOP
REAR MOUNTING
BRACKET HOOK
5
6
#8-18 X 1/4"
SCREW
FRONT MOUNTING
BRACKET TAB
FRONT LOOP
OF ROLLER
CHANNEL
FRONT LOOP
OF ROLLER
CHANNEL
WORKSURFACE
Page 14 of 24
939500367 Rev E
Installing Worksurface
to Understructure
(continued)
3.
Slide roller channels
up against the
worksurface.
4.
Rotate the
worksuface guiding the
brackets into the loops
on the roller channels.
As you are rotating the
worksurface, guide the
rear mounting bracket
hook into the rear loop in
the roller channel.
5.
Ensure the front
mounting bracket tab
engages the front loop in
the roller channel.
6.
Install #8-18 x 1/4"
screw through each front
roller channel into front
mounting bracket tab
using a square or phillips
driver.
