PB2
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
24
To install, use the 4 mm hex wrench and unscrew the tool bit holder (
1
, Fig. 8). Then,
remove the clamping knob (
2
) with the needle (
3
). Use the 3 mm hex wrench to
loosen the screw and remove the knob from the needle (
4
). Remove the nuts from
the mandrel (
5
), and then rotate the knob (
6
) to remove the mandrel (
7
).
Fig. 8.
Removing the mandrel
3
1
4
5
7
2
6
