Steel City 40-660, Руководство пользователя

Страница: 15 / 20

Page 15
BITS ON LINE BORING HEAD
1. Select the correct direction of boring bit right or left
according to the direction of the spindles (usually
colored).
2. Position the flat face towards the set screw on boring
bit shank. Insert it into the chuck.
3. The machine provides Ø10 mm chuck.
4. Use an allen wrench to turn set screws for tightening
the boring bit. At this time, make sure the running
direction is correct.
WARNING
!
Before mounting or removing the boring bits,
always remember to remove the safety guard
and turn power off.
Boring bit
Flat face
Ø10 mm chuck
Set screw
Allen key
MAINTENANCE
GREASE SPRINGS AND DOVETAIL
OIL STOP ROD, HOLD DOWN SPRING
AND SLIDING SHAFT