Steel City 40-660, Руководство пользователя

Страница: 14 / 20

Page 14
RETURN SPRING
This spring is used to return the boring handle to its
original position.
If the spring becomes loose with use, you can adjust the
springs by adjusting the spring rod.
HOLD DOWN
Loosen cap screws adjusting hold down for fixing wood-
piece.
Spring Rod
STOP ADJUSTMENT
Loosen lock handle rod to move the rod to desired position
then tighten or loosen stop knob ( C ) to move stop ( D ) to
desired position. The operator may adjust it according to
workpiece width. Maximum distance of width is 49”
(1250 mm). The knob rod and stop can be installled on
the other side.
SETTING STOPS ON FENCE:
The flip stop can be positionned on the fence in position.
loosen lock knob ( See figure ) and move the stop to
desired position.
Lock handle rod
Stop lock knob Rod
SAFETY GUARD
The safety guard prevents the operator’s hands from
touching the boring bits when changing workpiece. The
safety guard features automatic positioning.
To adjust the safety guard, loosen the two lock nuts.
Flip stop
Hold down
adjustment
cap screws