Steel City 35920, Руководство пользователя

Страница: 16 / 38

RIVING KNIFE COMPONENTS
ASSEMBLY
Note:
SEE FIG 12
Remove the table insert retaining bolt used to
secure the table insert (A) to the saw table. .
Fig. 12
INSTALLING AND REMOVING
THE RIVING KNIFE
1. Line up the riving knife in the proper direction to the
mounting bracket (B).
2. Push the Riving Knife all the way down into the
mounting bracket, make sure the lock pin is properly
locked in the hole of the Riving Knife. (The lock hole is
on the button side of the Riving Knife).
3. If it is not locked properly, hold the fasten knob (C)
and pull the lock pin off and make sure the lock pin is
properly located at the hole of Riving Knife. While
raising or lowering the knife, pin will snap in the hole
of the knife when located properly.
4. Tighten the fasting knob.(C)
1.Loosen the fasten knob (C).
2.Hold the knob and pull the locking pin out.
3.Remove the Riving Knife out of mounting bracket.
Make sure blade or arbor is at the highest
position before adding or removing the riving knife.
SEE FIG1 .
SEE FIG .
3
13
NOTE:
•Remove
Fig. 13
Fig. 14
20
BLADE ASSEMBLY
Fig. 15