Steel City 35-410, Руководство пользователя

Страница: 14 / 32

Page 14
INSTALLING THE DUST CHUTE
1. Align the 3 dust chute mounting holes with the
corresponding holes in the machine.
2. Screw 3 bolts with washers into the upper part of the
dust chute by hand.
3. Screw 3 bolts with washers into the lower part of the
dust chute by hand.
4. Secure the dust chute to the machine by tightening all
6 bolts with the right wrench.
ASSEMBLING THE KNIFE JIG
1. Using a pair of pliers, push a “C” clip into the inner
grooves on each end of the knife setting jig rod.
2. Slide one foot onto one end of the rod.
3. Secure the foot on the rod by pushing a “C” clip into
the outer groove in the rod.
4. Repeat step 2 and 3 to install the other foot. Set the
jig aside for use whenever knife settings need to be
verified or adjusted.