I N S T A L L A T I O N
10
General guidelines for Mounting
CAUTION. Risk of malfunction. Space blower
must be levelled in X & Z axis.
CAUTION:
Do not install Space blower above any electrical equipment, as water leak
from connection or abnormal operation can cause malfunction or short circuit.
Built-in SB
There are no specific installation steps for the mounting of the built-in space blower since it is
directly attached on the top of the IER steam humidifier.
Follow same installation steps for mounting as the one included in the IER electric steam
humidifier IOM.
Remote SB
Figure 6 – SB mounting holes location
Model
A
SBS
SBM
SBL
6.5in
[165mm]
Wall installation
1.
Verify that wall structure and strength is appropriate to support the operating weight of
the Space blower.
2.
Mark the wall or support according to the above holes location, and drill 2 holes to the
wall or support as per the size of anchors and/or screws.
3.
Use anchors of sufficient size (at least 1/4in [6mm]). Insert those anchors and the 2
screws, ensure that the screw heads extends 1/4in [6mm] from the wall, so that the
Space box
will be able to be hung on those 2 screws.
4.
With Top cover removed, hung the Space blower onto the 2 screws.
Ensure that the Space blower is properly levelled.
Tighten the 2 screws. Re verify the level in the 2 direction X and Z axis.
5.
Re-install the top cover to the Space blower.
Ensure that the mounting bracket is properly levelled.
1.
With front cover removed, hung the IER electric steam humidifier onto the mounting
bracket.
2.
Insert the bottom screw through the back plate of the humidifier and into the anchors
in the wall.
Tighten the bottom screw. Re verify the level in the 2 direction X and Z axis.
