8
fig.11
fig.13
fig.10
fig.12
Lift the water tank to make
sure there is water in the
reservoir. (fig.13)
After checking the reservoir,
replace the water tank on
the base.
Filling the water tank
Never use water that contains additives (starch, perfume,
aromatic substances, softener...) in the steamer. Additives can
affect the properties of steam, corrode internal parts and lead to
the formation of deposits.
Always check to be sure that the water tank is full before using
your garment steamer.
1.
Ensure that the steamer is unplugged. Remove the
water tank from the base of the appliance by
pulling the handle upwards. (fig.10)
2.
Unscrew the cap located at the bottom of the tank
and fill with water. (fig.11)
3.
Replace the cap and place the water tank back on
to the base. (fig.12)
The steamer can be used with tap water. If
the water in your area is hard, Steamone
recommends you that use distilled or
demineralized water to reduce scaling.
