7
Locking the pole:
1.
Adjust the pole to its maximum height by sliding it upwards
then tightening up the three screws. (fig.6)
2.
Insert vertically the hanger into the hook until it is firmly
fixed. (fig.7)
3.
Place the head support/hook on the top of the pole and push
down to secure. (fig.7)
fig.6
fig.7
fig.8
fig.9
fig.3
fig.6
fig.5
Before Use
Garment steamer assembly
Hose & Steam head assembly:
1.
Push the hose connector into the base until
resistance is felt. Lock the connector by turning
clockwise. (fig.8 & fig.9)
2.
Hang the steam head on the head
support/hook. (fig.1)
Pole assembly:
1.
Place the base on the floor and remove the
water tank. (fig.3)
2.
Unscrew the fastening lock from the base of
the steamer. (fig.4)
3.
Insert the pole and tighten the pole’s fastening
lock by turning in a clockwise direction until
the fastener is securely in place. (fig.5)
fig.4