Stealth Electric Bikes Owner’s Manual
23
MAINTENANCE SCHEDULE
Your Stealth Bike should be cared for and maintained according to the following schedule
.
Refer to your dealer for
assistance if required.
EVERY RIDE
Upon returning from each ride, perform the following checks and repairs.
1.
Wipe down your bike and remove excess moisture from mainframe and hub motor. This is essential in
maintaining the electrical system of your bike.
CAUTION
Washing your bike with high pressure could result in water damage to the electrical system. This will void
your warranty.
2.
Charge battery. REFER to Charging procedure pg. 11.
3.
Wipe down stanchion tubes. Failure to keep these clean could result in oil loss and damage to your forks.
4.
Check suspension fork bolts and clamps to ensure they are correctly secured.
5.
Lubricate the chain especially after off road riding. (Silicone based chain lube is preferred).
6.
Check the brakes for proper operation.
NOTE: Visually inspect brake pad thickness periodically for wear. Pads should
be replaced when pad thickness is less than 0.5mm.
EVERY MONTH
1.
Check the tyre pressures and wheels. Replace any damaged components.
2.
Ensure that steering head bearings, handlebars and associated bolts are tight.
3.
Check the seat and seat post alignment and fasteners.
4.
Ensure there is no fouling or excessive wear of wires and cables on the controls.
5.
Check the frame for damage. High force loads can damage frame components.
6.
Check for loose spokes and replace if necessary.
Brake pads
WARNING
Many Stealth service and repair tasks require special knowledge and tools. Do not begin any adjustments or service on
your bike until you have learned from your dealer how to properly complete them. Improper adjustment or service may
result in damage to the bike or in an accident which can cause serious injury or death.