Stealth Electric Bikes Owner’s Manual
7
STEALTH BIKE CARE
Stealth Electric Bikes can be ridden in a multitude of environments and weather conditions. While these bikes are
water resistant, care must be taken in exceptionally wet conditions and the bikes must never be submerged in water
in any way. Rain or snow may cause the metal on your e-bike to corrode and also affect the electrical system.
CLEANING
High pressure washers should not be used for cleaning. While the bikes are very well sealed, water ingress may occur
as a result of high pressure water being forced past seals and into electronic components. The preferred method for
cleaning is with a sponge and warm soapy water.
STORAGE
If the bike is going to be stored for periods of more than 3 weeks, it is preferred that the battery is disconnected from
the bike. During prolonged periods of inactivity, the battery should be connected to the charger for 1 hour every
month in order to prolong the life of the battery.
Due to the weight and unique style of your Stealth Bike, only an approved Stealth Electric Bike rack should be used to
carry your bike. Bikes should be properly secured in an upright position to prevent damage to the controls and cranks
during transport.
Do not expose your bike to extreme highs or lows of temperature. Ideally the bike should be stored at temperatures
between -5˚C and 45˚C.
Avoid storing the bike in wet or damp areas or areas that are prone to extended periods of direct sunlight.
If you have to ship your bike, make sure it is properly packed and protected to avoid damage.
WARNING
Excessive water exposure will void your warranty. This is an electric bike and all care should be taken to avoid excessive
water exposure.
WARNING
Riding your Stealth Bike in sand will void your warranty. Due to the demands of deep sand on the power train of the
bike, we advise that this bike should not to be ridden in sand.
