INSTALLATION AND ADJUSTMENT
14
§4 Operation
§4.1 Layout for the panel
1
Positive output:
The welder’s positive polarity output.
2
Negative output:
The welder’s negative polarity output.
3
Aero socket:
Is connected to torch switch control wire.
(
It has 14 leads and lead 8 - lead 9 are
connected to torch switch control wire
)
.
4
Shield gas connector:
Is connected to the gas input pipe of torch.
5
Power source switch:
Switch to “ON”, the welder is turned on, while switch to “OFF”, the welder
is turned off.
6
Power source input:
To connect power source.
7
water box connector:
To connect water box.
8
Shield gas input joint:
To connect one head of the gas hose while the other head of which is
connected to argon gas cylinder.
STEALTH DIGI-TIG 320 AC/DC PULSE
4 OPERATION
4.1 Machine Controls
1 Positive output: Positive polarity output
2 Negative output: Negative polarity output.
3 Aero socket: Connected to torch switch control wire (has 12 leads with 8-9
connected to torch switch control wire).
4 Shield gas connector: Connected to torch gas input pipe.
5 Power source switch: Switch to ‘ON’ – welder is turned on. Switch to ‘OFF’ –
welder is turned off.
6 Power source input: Connects power source.
7 Water box connector: To connect water box.
8 Shield gas input joint: Connects one head of the gas hose while the other is
connected to argon gas cylinder.
14