STEALTH DIGI-MIG 200
19
4.2.5 Welding parameter adjustment
• For different wire diameters, the minimum welding current available will vary
• Adjust Current knob – the corresponding welding voltage is changed
automatically
• When the programmable welding voltage is not suitable for the operator – the
voltage can be finely adjusted by the knob
• The arc characteristics can be adjusted using the wave control knob
4.3 TIG welding operation
4.3.1 Press the welding operation key, select TIG mode – LED is lit
4.3.2 Press the welding mode key, select 2T or 4T
4.3.3 Adjust the current knob to control the welding current
4.3.4 Adjust the down slope knob to control the welding current descend time
OPERATION
- 18 -
3)Press the welding mode key, choose 2T or 4T
;
4)Spool Gun Switch turn on(up):
3. Adjust Welding parameter
1) Different wire diameter ,the minimum welding current is different
;
2) Adjust the current knob , the corresponding welding voltage is changed automatically
;
3) When the programmable welding voltage isn’t the perfect for the operator, the voltage
can be changed tinily by adjusted the knob
;
4) If the operator adjust the wave control knob, the arc characteristics can be controlled
;
§4.2.2
TIG mode operation:
1. Press the weld manner key, choose TIG manner and the TIG LED is lighted
;
2. Press the welding mode key, choose 2T or 4T
;
3. Adjust the current knob to control the welding current
;
Содержание 9000H
