STEALTH DIGI-MIG 200
18
4.2 MIG welding operation
4.2.1 Shielding gas material selection:
• Ferrous – 80% Ar + 20% CO2
• Stainless Steel – 98% Ar + 2% O2
• Aluminium – 100% Ar
4.2.2 Welding state choice:
• Press the Weld key and select MIG mode – the LED is lit:
• Turn off Spool Gun switch (down)
• Manual Wire switch and Air Check switch, Burnback adjust, Slow Feed adjust,
Post Flow adjust, Pre-Flow adjust:
4.2.3 Press the welding mode key, select 2T or 4T:
4.2.4 Turn on Spool Gun switch (up)
OPERATION
- 17 -
18.Spool Gun Switch
19.Burnback knob
20.Slow feed knob
21. Manual wire switch & air check switch: up for manual wire and down for air check.
22.Post flow knob
23Pre-flow knob
§4.2 Welding operation
For example MULTIMIG 200
§4.2.1
MIG mode operation:
1. Shielding Gas choice
1) When the wire material is Fe, the shielding gas is 80%Ar + 20%CO2
;
2) When the wire material is Ss, the shielding gas is 98%Ar + 2%O2
;
3) When the wire material is Al, the shielding gas is 100%Ar.
2. Welding state choice
1)Press the weld manner key, choose MIG manner and the MIG LED is lighted
;
2) Spool Gun Switch turn off(down).
3) Manual wire switch & air check switch
,
Burnback adjust
,
Slow feed adjust,Post flow
adjust, Pre-flow knob adjust
;
OPERATION
- 17 -
18.Spool Gun Switch
19.Burnback knob
20.Slow feed knob
21. Manual wire switch & air check switch: up for manual wire and down for air check.
22.Post flow knob
23Pre-flow knob
§4.2 Welding operation
For example MULTIMIG 200
§4.2.1
MIG mode operation:
1. Shielding Gas choice
1) When the wire material is Fe, the shielding gas is 80%Ar + 20%CO2
;
2) When the wire material is Ss, the shielding gas is 98%Ar + 2%O2
;
3) When the wire material is Al, the shielding gas is 100%Ar.
2. Welding state choice
1)Press the weld manner key, choose MIG manner and the MIG LED is lighted
;
2) Spool Gun Switch turn off(down).
3) Manual wire switch & air check switch
,
Burnback adjust
,
Slow feed adjust,Post flow
adjust, Pre-flow knob adjust
;
OPERATION
- 18 -
3)Press the welding mode key, choose 2T or 4T
;
4)Spool Gun Switch turn on(up):
3. Adjust Welding parameter
1) Different wire diameter ,the minimum welding current is different
;
2) Adjust the current knob , the corresponding welding voltage is changed automatically
;
3) When the programmable welding voltage isn’t the perfect for the operator, the voltage
can be changed tinily by adjusted the knob
;
4) If the operator adjust the wave control knob, the arc characteristics can be controlled
;
§4.2.2
TIG mode operation:
1. Press the weld manner key, choose TIG manner and the TIG LED is lighted
;
2. Press the welding mode key, choose 2T or 4T
;
3. Adjust the current knob to control the welding current
;
Содержание 9000H
