Page 9 of 13
19.
Retrieve the control module,
adhesive strips, and
14”
cable
tie. Use the adhesive strips
and
14”
cable tie to mount
and secure the control
module to the vehicle on the
driver side, as shown.
INSTALL WIRING KIT
CONTINUED
20.
Locate the tail of the 4
-
way
connector wire and the
output side wires of the
control module. Attach each
similar color wire to each
other using a red butt
connector and crimping tool.
NOTICE (OPTIONAL): The butt
connectors are heat shrink
connectors. Apply heat to
waterproof the connectors after
crimping.
21.
Secure harness to Stealth
hitch frame with cable ties.
Maintain an
18”
loop from the
cable tie to the 4
-
way plug.
Add the magnetic cable
holder and secure to the
harness close to the 4
-
way
plug, with a cable tie.
