Page 3 of 13
1.
Remove the taillight cover.
Locate and remove plastic
screw from side wall using a
flathead screwdriver.
2.
Insert plastic pry tool at the
side of the plastic cover and
pry inward. Then pry upward
to remove rear taillight cover.
GAIN ACCESS TO MOUNTING AREA
3.
Locate and remove (1) screw
holding the top of the fascia.
4.
Remove (2) nuts that secure
the taillight.
5.
Slide the taillight to the rear of
the vehicle. A plastic pry tool
can be used to help if the light
does not slide freely.
6.
With the light removed,
disconnect the light plug by
pushing down on the clip and
pulling the plug outward.
Repeat Steps 1
-
6 on other
side of vehicle.
NOTICE:
Installation of hitch requires removal of vehicle parts and interaction with vehicular
electronics.
Before installation, check the condition of body panels and note any locations
where panels are not flush.
Check the electronic functions of the vehicle, such as: headlights,
taillights, turn signals, cameras, backup sensors, Parking Distance Controller (PDC), foot
activated cargo access, etc.
It is the responsibility of the installer to restore the fit and
function of the vehicle.
