Stealth Cam stc-g26ng, Инструкция по эксплуатации

Страница: 24 / 59

www.stealthcam.com Page
877-­‐269-­‐8490
24
VIEW & DELETING IMAGES
The camera allows for two (2) ways to view your images. First is the direct connection for
the camera to the computer via a USB cable (not included). This is a USB mini to standard
USB (type A/B) cable. By simply turning the unit to the OFF position, and plugging the
USB mini end into the camera and the standard USB end into the computer, the
computer will register the camera as a card reading device. Once connection with the
computer has been established the files may be review based upon the software installed
on the computer. Please refer to the software’s Owner’s Manual for exact viewing of
images.
NOTE: Support for this operation is limited to but not exclusive to the Windows Vista
operating system and above, and also the Mac OS 10.6 and above. Any operating
systems below the above-­‐mentioned are not guaranteed to be compatible and may
result in system errors
.
The second option is to remove the SD memory card from the camera, and using a card
reading device to view the images. Please refer to the Owner’s Manual for the particular
device in use for viewing the files.
NOTE: SD memory card viewers not manufactured by Stealth Cam may create conflicts
on the memory card. Should this occur and the card is no longer working properly with
the unit, the SD memory card will need to be reformatted.