Stealth Cam stc-g26ng, Инструкция по эксплуатации

Страница: 16 / 59

www.stealthcam.com Page
877-­‐269-­‐8490
16
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
Using the UP and DOWN arrows will allow the setting to be change from 00 to 59.
Again when this setting is on the appropriate minute, press the RIGHT arrow key to
move to the AP (am/pm) setting and it will start to blink. Using the UP and DOWN
arrows will allow the setting to be changed from AM to PM.
§
TL STOP – 08:00AM (default): This setting is used to give the camera the stop time
for when to end the time-­‐lapse photography. The default format is in a HH/MM/AP
setup, should the time format be in 24 hour the format will be HH/MM. With the
HH (hour) setting to blinking, use the UP and DOWN arrows to allow the setting to
be changed from 1 to 12. Once this setting is on the appropriate hour, press the
RIGHT arrow key to move to the MM (minute) setting and it will start to blink. Using
the UP and DOWN arrows will allow the setting to be change from 00 to 59. Again
when this setting is on the appropriate minute, press the RIGHT arrow key to move
to the AP (am/pm) setting and it will start to blink. Using the UP and DOWN arrows
will allow the setting to be changed from AM to PM.
§ REDUCE BLUR – ON : This is used to determine if the camera should use the MATRIX
Blur reduction technology to dramatically reduce the blur effect resulting in clearer
night time infrared shots. With this option blinking, press UP/DN arrows will cause
the camera to cycle between On/Off.
EXAMPLE: Data Stamping on the bottom portion of the picture indicates the camera took a picture in
Time Lapse (TL) mode.