Stealth Cam STC+E38NXT, Инструкция по эксплуатации

Страница: 9 / 40

www.stealthcam.com
877-­‐269-­‐8490 Page 9
CAMERA PROGRAMMING
This E38NXT features 5 distinct modes of operation: Test / Off / A / B / Manual . Each setting is
activated based upon the position of the switch on the inside of the unit.
Test -­‐ This position is used to help determine the effective coverage area of the sensor during
mounting of the camera, and is also used to program the camera for the Manual configuration.
Off
– This position completely powers down the unit.
A – This is the first Quick Set programming mode. With this setting the camera is preprogrammed to
take photos at 8MP resolution, 30 second timeout delay between activations and takes a burst of
three (3) photos during every trigger activation.
B – This is the second Quick Set programming mode. This setting is preprogrammed to take photos as
8MP resolution, 30 second timeout delay and take six (6) photos during every trigger activation.
Manual – This is the setting that will use the defined configuration from the Test position for the
setting of the camera defined by the customer. The default programming is set to take photos as
1.3MP resolution, 30 second timeout delay, and take one (1) photo during every trigger activation.
For videos the default value is 720P HD resolution and a 10 second recording length.