Steadicam Steadimate-S, Руководство пользователя

Страница: 8 / 24

7
Wrap the outer clamp ring
around the groove in the inner
clamp ring.
Either side can face up.
Install two M4 screws finger
tight first, to ensure even
clamping.
Install the bushing surfaces
inside the outer clamp halves,
as shown.
Use the 3mm Allen wrench to
crisscross tighten each of the
four screws a little bit, starting
with the bottom screws, until
the clamp is snug.
NOTE: the pan motor must be
free to rotate, don’t
clamp the motor!
Attaching the outer clamp ring
x2
1
3
2
4