Installation G
Solar Tube Company - Eco Airpump
www.ecoairpump.co.uk
Support Line: 08444 930099
8
1. Feed the stainless pipe through a back nut, threads facing cut end.
2. Tighten a securing clip around the last groove on the pipe (one raised segment
protruding from clip).
3. The back nut is attached to the fitting WITHOUT the washer and tightened
– this creates
a flange on the end of the pipe.
4. Unscrew the fitting, insert the washer, reconnect the fitting and tighten.
The compression fittings attach to the ends of the manifold.
The PAW self seal nipples attach to the inlet and outlet of the pump station, black rubber seal
ends connecting to pump station, bare thread ends connecting to back nut.
Various additional fittings to connect to the back nuts are available.
