www.ecomposter.net
Unpack Standard Base
Standard Base Assembly
Step 1:
Step 2:
Assemble Standard Base
SB4 x 3
M5 Screw with washer
SB1 x 4
Base
SB2 x 1
Pin
SB3 x 4
Spike
SB5 x 3
M5 Nut
Unpack the standard base for your
Eco
mposter and make sure you have the following components. If
you are missing any components, please contact Customer Service at (800) 293-2923.
The standard base had been designed to easily open and close, allowing the
Eco
mposter sphere
to roll inside. Place the four SB1 base parts next to each other. Fit the left side of one piece into
the right side of the piece to the left of it.
Phillips Screwdriver
COMPONENTS:
TOOLS NEEDED:
A
NOTE: Do not tighten the screws completely. Tighten the screws only enough
so that base pieces are held together but the position can still be adjusted.
12 of 18
Use a SB4 screw with washer and SB5 nut to connect the base pieces at three sides. Tighten using a
Phillips screwdriver.
B
