Staude MULTI-FLY, Инструкция по эксплуатации

Страница: 75 / 76

Page 75
Instruction manual Staude MULTI-FLY – Version 07.12.2006
Ill.: 4.17 MultiFly AID Menu- portrait Page 31
Ill.: 4.18 MultiFly AID Menu – enable scanning Page 31
Ill.: 4.19 MultiFly AID Menu – save to job Page 31
Ill.: 4.20 MultiFly AID Menu – automatic movement Page 31
Ill.: 4.21 MultiFly AID Menu – Restore defaults Page 31
Ill.: 4.22 Brightness Button Page 32
Ill.: 4.23 F-Key Scan Brightness menu Page 32
Ill.: 4.24 Scan Scaling slider Page 33
Ill.: 4.25 Setting up a Prescan - picture 01 Page 33
Ill.: 4.26 Setting up a Prescan - picture 02 Page 33
Ill.: 4.27 Setting up a Prescan - picture 03 Page 34
Ill.: 4.8 Setting up a Prescan - picture 04 Page 34
Ill.: 4.29 Setting up a Prescan - picture 05 Page 34
Ill.: 4.30 Example for a successful evaluation of a jacket Page 34
Ill.: 4.31 Starting the scanning process Page 35
Ill.: 4.32 Example for a Prescan window during the scanning process Page 35
Ill.: 4.33 MFScan while scanning Page 36
Ill.: 4.34 Deletion of any Image Page 36
Ill.: 4.35
Review last AID Page 37
Ill.: 4.36
Review last fiche Page 37
Ill.: 4.37
Review old fiche Page 37
CHAPTER 05
Ill.: 5.01
The MultiFly AID menu Page 39
Ill.: 5.02 Prescan / Raster – Selection for Gridfiches Page 39
Ill.: 5.03 MultiFly AID Menu – number of rows Page 39
Ill.: 5.04 MultiFly AID Menu – number of columns Page 39
Ill.: 5.05 MultiFly AID Menu – brightness level Page 40
Ill.: 5.06 MultiFly AID Menu – arrow key to the left, tight , up and down Page 40
Ill.: 5.07 MultiFly AID Menu – steprange Page 40
Ill.: 5.08 MultiFly AID Menu – prism installed Page 40
Ill.: 5.09 MultiFly AID Menu – portrait Page 40
Ill.: 5.10 MultiFly AID Menu – enable scanning Page 40
Ill.: 5.11 MultiFly AID Menu – save job Page 41
Ill.: 5.12 MultiFly AID Menu – automatic movement Page 41
Ill.: 5.13 MultiFly AID Menu – TOP left, TOP right and BOTTOM left Page 41
Ill.: 5.14 MultiFly AID Menu – prism installed Page 41
Ill.: 5.15 MultiFly AID Menu – prism attached Page 41
Ill.: 5.16 MultiFly AID Menu – no prism attached Page 41
Ill.: 5.17 MultiFly AID Menu – prism installed Page 41
Ill.: 5.18 MultiFly AID Menu after adjustments Page 42
Ill.: 5.19 Scan scaling slider Page 42
Ill.: 5.20 Starting of the scanning process Page 44
Ill.: 5.21 MultiFly AID Menu while scanning Page 44
Ill.: 5.22 MFScan while scanning 01 Page 45
Ill.: 5.23
MFScan while scanning 02 Page 45
Ill.: 5.24
Scanner setup Page 46
10.
Table of figures