Page 54
Instruction manual Staude MULTI-FLY – Version 07.12.2006
Three Point Adjustment procedure:
>
Input of the parameters:
Number of Rows & columns (see chapter 4).
>
Press
“Grid”
button
>
Insert the
Microfiche
.
Please make sure you have loaded the microfiche correctly
on the left side (also see chapter 4). Press
OK
.
>
The Three Point Adjustment is going to be accomplished afterwards.
Three Point Adjustment
1>
By pressing the “Top-left” button the microfiche carrier is moving
to the first microfiche image. The first image must be positioned
exactly into the mask of the microfilm scanner with the help of the
arrow keys.
2>
By pressing the “Bottom-left” button, the microfiche carrier is
moving to the second image. The image must be positioned
exactly into the mask of the microfilm scanner with the help of the
arrow keys
3>
By pressing the “Top-right” button, the microfiche carrier is moving to the third
image. The image must be positioned exactly into the mask of the microfilm
scanner with the help of the arrow keys
>
Check the positions with the button 1, 2 and 3 and correct them if necessary with
the help of the arrow keys. If the offset is correct, start the scanning process with
the start button “Grid”.
Insertion of the next microfiche:
>
A new fine adjustment has only to be made, if the offset differs from the previous
Fiche
5.
Scanning of structured microfiches
ill.: 5.20
