1. GENERAL SAFETY RULES
4
EN
• Remove any adjusting key or wrench before turning the power tool on.
A wrench or key left attached to a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery, keep your hair,
clothing and gloves away form moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• Keep mains lead clear from working range of the machine. Always lead the
cable away behind you.
• After switching off, the machine will not be idle immediately (After running of
the work spindle.) Allow the machine to come to a stop before putting down.
• Never reach into the danger area of the machine when it is running.
• Always use the auxiliary handle. Even if the machine has a safety clutch since
this safety clutch only engages when the machine blocks with a jerk.
4) Power tool use and care
• Do not force the power tool. use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
• Do not use the power tool if the switch dose not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of staring the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tool. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
• Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different form intended could result in a
hazardous situation.
• When drilling in walls ceiling, or floor, take care to avoid electric cables and
gas or water-pipes .
• Before use, check machine, cable, and plug for any damages or material
fatigue.
5
EN
2
.
FUNCTIONAL DESCRIPTION AND SPECIFICATION
FUNCTIONAL DESCRIPTION
SPECIFICATION
STANDARD ACCESSORIES
1. Chuck
2. Depth gauge
3. Screw
4. Selector lever
Model
Rated voltage
Rated frequency
Rated input power
No-load speed
Impact rate
Impact energy
Max. drilling capacity in concrete
Weight
MPR70
2
2
0
-240
V
50 Hz
1200 W
300 - 600 RPM
3500/min
10 J
42 mm
7,1 kg
Plastic case, auxiliary handle, depth gauge
5. Trigger switch
6. Variable speed switch
7. Auxiliary handle
CE DECLARATION OF CONFORMITY
We
STATUS ITALIA S.R.L.
as the responsible manufacturer declare that the
following
STATUS
machine(s):
Rotary hammer
Model No./ Type:
MPR70
are of series production and сonforms
to the following European Directives:
2004/108/EC, 2006/42/EC, 2014/30/EU
And are manufactured in accordance with the following standards or standardised
documents:
EN 55014-1:2006/+A1:2009/+A2:2011, EN 55014 - 2:2015,
EN 61000-3-2:2014, EN 61000-3-3:2013, EN 60745-1:2009+A11:2010,
EN 60745-2-6:2010, EK9-BE-87:2014, EK9-BE-88:2014
The technical documentation kept by the manufacturer:
STATUS ITALIA S.R.L.,
via Aldo Moro, 14/A, 36060 - Pianezze (VI), ITALY
Caron Giacinto
Director
STATUS ITALIA S.R.L.
NOISE AND VIBRATION INFORMATION
Noise emission (according to EN 60745)
Sound pressure level L
pA
= 98
dB(A),
К
pA
= 3dB
Sound power level L
wA
= 109
dB(A),
К
wA
= 3dB.
Vibration emission
Vibration emission value
a
h
,
HD
= 10,8 m/s² ,
a
h
,
CHeq
= 10,57 m/s²
Uncertainty K = 1.5 m/s²
