Status EVP300, Руководство пользователя

Страница: 4 / 12

EN
4
1.1. TECHNICAL DATA
Dimensions
(with the stand)
Width: 80 mm
Depth: 180 mm
Height: 136 mm
Weight Pump with the stand approximately 0,49 kg, adapter approximately 0,6 kg.
Material
ABS plastic
Pump Single–piston pump (self-oiling – no maintenance necessary)
Vacuum pressure - 500 mbar
Motor 12 V DC
Automatic cut-off after one minute in case of improper use.
Max RPM 3500
Pump volume
11 l/min
Controls Electronic
Adapter input: 110-240 V ~ 50-60 Hz, 250 mA
output: 12 V DC, 2000 mA
a) Pay attention on the place, where vacuum pump
will be positioned. Working surface must be dry,
normal temperature (not hot) and clear from ob-
structions or water source.
b) Check the power cable and electrical outlet before
you plug in the appliance. Make sure there are no
breakdowns.
c) Appliance should be cleaned only with a dry or sli-
ghtly damp cloth.
d) Use the appliance only for the purposes described
in the User Manual.
e) Warranty is invalid if:
• the appliance has been repaired by somebody who
is not an authorised person or a professional.
• you use the appliance for unintended purposes.
• you do not respect safety regulations and do not
follow the instructions in the User Manual.
The manufacturer will not accept responsibility for any
damage that may occur as a result of not following the
User Manual or improper use.
1.2. IMPORTANT SAFETY
INSTRUCTIONS
1.3. OPERATING CONDITIONS
Maximum ambient temperature in normal use is
+40°C; the average of temperatures over a 24-hour
period should not 35°C. Minimum ambient
temperature is –5°C.
Surrounding air should be clean; relative humidity
should not exceed 50% at the maximum temperature
of +40°C. Higher relative humidity is allowed at lower
ambient temperature (e.g. 90 % at +20°C).