Status EVP300, Руководство пользователя

Страница: 3 / 12

EN
3
Figure 1: Components*
The figure below shows the electrical vacuum pump. Important points are marked with numbers and explained
in the table:
1. Outer casing
2. Start/Stop Button
Initiation and interruption of vacuum packing process.
3. Stand
4. Silicon gasket
By vacuum packing process it should be placed precisely on the valve of the chosen container.
5. Rubber tap
6. Rib
In the case the pump is placed on the wall, remove the ribs.
7. Wall inserted piece
8. Screws
* Components are marked with the same numbers also on Figures 3 and 4.
1. COMPONENTS AND FUNCTION BUTTONS