9
LEVELLING THE WASHING MACHINE
WARNING! The lock nuts on all four feet must be screwed tightly against the housing.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the
machine is level and steady.
CONNECT THE WATER SUPPLY HOSE
WARNING! To prevent leakage or water damage, follow the instructions in this chapter.
Do not kink, crush or modify water inlet hose.
Connect the water supply
hose to the water inlet valve
and a water tap with cold
water as indicated.
NOTE:
Connect manually, do not use tools. Check if the connections are tight.
DRAIN HOSE
WARNING! Do not kink or protract the drain hose. Position drain hose properly,
otherwise damage might be a result of water leakage.
Connect the end of the drain hose as per the diagram below:
Washing
Machine
Drain Hose
Indirect connection
Standpipe
Trap
(may not be
permitted
below floor)
45cm min
to
75cm max
(some areas)
15cm min
to
45cm max
Waste
Pipe