13
OPERATING INSTRUCTIONS
QUICK START
CAUTION!
• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and
to neutralise potential odours, it’s recommended to clean your appliance before first use. For this
reason, start the Cotton program at 90°C without laundry and detergent.
CALIBRATION
It’s recommended to calibrate the washing machine, so that provide the best performance.
The appliance is able to detect the amount of laundry loaded. This function is optimizing the product
performance by minimizing energy and water consumption, saving you money and time. For this reason
it’s recommended to calibrate the appliance for best use.
1. Remove all accessories from the drum and close the door;
2. Insert the mains plug to the socket;
3. Switch on the washing machine and press “Speed” and “Delay” simultaneously for 10 seconds until
“t19” is displayed;
4. Press [ ] to start the appliance and wait till “ **** ” is displayed.
5. The machine MFG60-S1210/C20E-EU(NE) does not need calibrate, so step 1 to step 4 can be
skipped.
1. BEFORE WASHING
Plug in
earth
terminal
Main
wash
Softener
Prewash
Open tap
Load
Close door
Add detergent
NOTE:
Detergent only needs to be added in compartment I if the pre-wash function is selected.
2. WASHING
Power On
Select program
Select function
Press Start/Pause to
start the program
3. AFTER WASHING
An alert will sound and “End” will appear on the display