STATESMAN BIC5050S, Инструкция по эксплуатации

Страница: 16 / 20

16
TROUBLE SHOOTING GUIDE
If you are having problems with your appliance, please use our troubleshooting guide below. If you
are unable to resolve the issue using this guide, please ring our Customer Service Department on
0844 848 5861. Please have the model code and purchase information available.
Fault Possible Cause Solution
Appliance does not work. Temperature control dial is set at
number ‘0’.
Set the dial to another number to
switch on the appliance.
Mains plug is not plugged in or is
loose.
Insert mains plug.
Fuse has blown or is defective. Check fuse, replace if necessary.
Socket is defective. Mains malfunctions are to be
corrected by a qualified electrician.
The food is too warm. Temperature is not properly adjusted. Please refer to the initial ‘Temperature
Setting’ section.
Door was open for an extended
period.
Open the door only as long as
neccessary.
A large quantity of warm food was
placed in the appliance within the last
24 hours.
Turn the temperature regulation to a
colder setting temporarily.
The appliance is near a heat source. Please refer to the ‘Installation’
section.
Appliance cools too much. The temperature is set too cold. Turn the temperature regulation knob
to a warmer setting temporarily.
Unusual noises. Appliance is not level. Re-adjust the feet.
The appliance is touching the wall or
other objects.
Move the appliance slightly.
Water on the floor. Water drain hole is blocked. Please refer to the ‘Cleaning and
Maintenance’ section.