STATESMAN BIC5050S, Инструкция по эксплуатации

Страница: 10 / 20

10
fig.K
DOOR FITTING AND REVERSING
The appliance door can be fitted to open to either the left or the right depending on its location. The
appliance must be tilted and supported in order to carry this out. It is advisable to get some help
during this procedure. Do not lay the appliance flat as this may damage the coolant system. Take
care when fitting and tightening screws. Ensure the Appliance is unplugged and empty.
To change the direction of the door, please follow these instructions:
• Unscrew the upper door hinge (1) and take the upper door (2) to a safe place.
• Unscrew the door hinge pin (3) and screw it to the opposite side firmly and take to a safe place.
• Unscrew the middle door hinge (4) and take the lower door (5) to safe place. Screw back the
fixing bracket (6) to original position without the middle door hinge (4).
• Take the door lower pin (7) to opposite side.
• Take the hole plugs (8) to empty holes on opposite side.
• Place the lower door (5) over the door lower pin (7) and close onto cabinet.
• Unscrew the fixing bracket (9). Position the middle door hinge (4) onto the lower door (5). Place
the fixing bracket (6) onto the middle door hinge (4) and screw together onto cabinet firmly.
• Place the upper door (2) over the middle door hinge (4) and position the upper door hinge (1)
over the upper door (2) and then screw the upper door hinge (1) firmly onto opposite side of
original position.
8
1
3
2
5
7
6
4
8
9