41
Copyright © 2021 China Starwin
communication between ACU and ODU (Out-Door Unit) control board.
Figure 7-26: Connectivity Control section of M&C Application
Modem
functionality and Beam Switching section shown at Figure 7-27 is located on the right
side of M&C Application interface below the Menu bar. The section displays the built-in modem
current functionality:
-
Status
: Indicates built-in modem powering status ON/OFF
-
RX
: Indicates built-in modem receiving status
-
TX
: Indicates built-in modem transmitting status
-
NET
: Indicates the built-in modem successful satellite network connectivity
-
SNR
: Shows received signal to noise ratio of the built-in modem
-
Switch Beam
: Manual Satellite/Beam switching button. Clicking the button, the system
switches to the next Satellite/Beam in the list. The ACU response to this command is
displayed in Event Log.
Figure 7-27: Modem functionality and Beam Switching section
System State
section shown at Figure 7-28 is located in the mid part of M&C Application
interface and is divided to two functional parts
Beacon Receiver/GNSS
and
Current System
Parameters
.
