31
Copyright © 2021 China Starwin
Run the
NDP472-KB4054530-x86-x64-AllOS-ENU.exe
file, shown at Figure 7-4, and
follow installation instructions.
Figure 7-4:
NET47 Environment Offline Installation File
7.2
M&C Application Communication with V9 OTM45
The M&C Application communicates with the V9 OTM45 via the computer network port.
The
V9 OTM45 ACU default IP address is 192.168.16.101
. To communicate with V9
OTM45:
- Navigate to
Control Panel\Network and Internet\Network Connections\Local Area
Connection;
- Select
Internet Protocol Version 4 (TCP/IPv4);
- Click
Properties
and select
Use the following IP address
as shown at Figure 7-5.
- Set the PC IP address to be at the same subnet with V9 OTM45 default IP address,
mentioned above.
- Set
Subnet mask 255.255.255.0
and click
OK
button.
Figure 7-5: PC Network Setting
NOTE: If the V9 OTM45 ACU default IP address is modified, the PC IP Address should be
Modified correspondingly.
